Northcoast Recycling Logo
Home
Recycling
Shredding
NAID AAA Certification
Storage
Image Silo
Services
Equipment
Our Facility
P.S.A.'s
Contact


Main Image


>> Back to Main Equipment Page

Desk Side / Personal Shredders


Destroyit Model 2240

  • Automatic start and stop controlled by photo cell
  • Single, multifunction switch with pilot light for standby, stop, reverse
  • High quality, hardened steel cutting shafts take staples and paper clips (strip-cut model takes credit cards)
  • Double protection against overheating
  • Attractive, impact-resistant plastic shred bin
  • Convenient handle for lifting shredder unit from the shred bin
  • Automatic stop when shred bin is removed from cabinet
  STRIP-CUT CROSS-CUT
Shred size 3/16"
(4mm)
1/8"x1"
(3x25mm)
Sheet capacity 10-12* 5-6*
Shred speed 12ft./min. 12ft./min.
Shipping wt. 28lbs. 28lbs.
Both Models    
Feed opening 8 3/4"  
Max. horsepower 1/5  
Motor output .15KW  
Electrical requirements 115V  
Dimensions (DxWxH) 8 3/4"x13 1/2"x21"
*may vary due to variations in paper and power supply


Destroyit Model 2260

  • Window in removable shred bin shows amount of shreds collected
  • Automatic start and stop controlled by photo cell
  • Single, multifunction control switch with pilot light for stand-by, stop (off), and reverse
  • Transparent safety shield in the feed opening
  • High quality, hardened steel cutting shafts take staples and paper clips (strip-cut model takes credit cards)
  • Lifetime warranty on the cutting shafts
  • Quiet and powerful single phase motor
  • Double protection against overheating
  • Durable gears enclosed in dust-proof housing
  • High quality wooden cabinet
  • Automatic power cut-off when shred bin is removed from cabinet
  • 5 gallon shred volume
  STRIP-CUT CROSS-CUT
Shred size 3/16"
(4mm)
1/8"x1"
(3x25mm)
Sheet capacity 10-12* 5-6*
Shred speed 12ft./min. 12ft./min.
Shipping wt. 27lbs. 28lbs.
All Models    
Feed opening 8 3/4"  
Max. horsepower 1/5  
Motor output .15KW  
Electrical requirements 115V  
Dimensions (DxWxH) 8 3/4"x13 1/2"x21"
*may vary due to variations in paper and power supply


Destroyit Model 2270

  • Two separate cutting heads with separate feed openings—one for paper and one for CDs and credit cards
  • Transparent safety shield in the feed opening
  • Automatic power cut-off when shred bin is removed from high quality wooden cabinet
  • Double protection against overheating
  • Automatic start and stop controlled by photo cell
  • Single, multifunction control switch with pilot light for stand-by, stop (off), and reverse
  • High quality, hardened steel cutting shafts take staples, paper clips, credit cards, and CDs
  • Lifetime warranty on the cutting shafts
  • Quiet and powerful single phase motor
  • Durable gears enclosed in dust-proof housing
  • Window in shred bin shows amount of paper shreds collected
  • Integrated collection tray in shred bin keeps plastic shreds separate from paper
  • 5 gallon shred volume for paper; 3/4 gallon shred volume for plastic
  STRIP-CUT CROSS-CUT
Shred size 3/16"
(4mm)
1/8"x1"
(3x25mm)
Sheet capacity 10-12* 5-6*
Shred speed 12ft./min. 12ft./min.
Shipping wt. 32lbs. 32lbs.
All Models    
Feed opening 8 3/4"  
Max. horsepower 1/5  
Motor output .15KW  
Electrical requirements 115V  
Dimensions (DxWxH) 8 3/4"x13 1/2"x21"
*may vary due to variations in paper and power supply


Destroyit Model 2360

  • Electronically controlled, transparent safety shield in the feed opening
  • "Easy Switch" control element uses color codes and back-lit symbols to indicate operational status
  • Automatic reverse and power cut-off (avoids paper jams)
  • Automatic power cut-off when shred bag is full or when cabinet door is opened
  • Double protection against overheating
  • ESM® (Energy Saving Mode) after 1 hour of inactivity
  • Automatic start and stop controlled by photo cell
  • High quality, hardened steel cutting shafts take staples, paper clips, and credit cards (strip- and cross-cut models)
  • Super micro-cut (SMC) model meets all NSA/CSS specifications and is DOD approved
  • Lifetime warranty on the cutting shafts (strip- and cross-cut models)
  • High quality wooden cabinet mounted on casters
  • 13 gallon shred volume
  STRIP-CUT CROSS-CUT SMC
Shred size 3/16"
(4mm)
3/32"x 5/8"
(2x15mm)
1/32"x3/16"
(.8x5mm)
Sheet capacity 12-14* 6-8* 5-7*
Shred speed 27ft./min. 14ft./min. 14ft./min.
Shipping wt. 53lbs. 53lbs. 53lbs.
All Models      
Feed opening 9 1/2 "    
Max. horsepower 1/2    
Motor output .39KW    
Electrical requirements 115V    
Dimensions (DxWxH) 11 3/4"x15 1/2"x28 3/4"
*may vary due to variations in paper and power supply


Destroyit Model 2404

  • Automatic start and stop controlled by photo cell
  • High sheet capacity
  • High quality, hardened steel cutting shafts take staples, paper clips, and credit cards (strip-cut model takes CDs)
  • Lifetime warranty on the cutting shafts
  • Quiet and powerful single phase motor
  • Durable gears enclosed in dust-proof housing
  • High quality wooden cabinet mounted on casters
  • Environmentally friendly reusable plastic bag
  • 13 gallon shred volume
  STRIP-CUT CROSS-CUT
Shred size 3/16"
(4mm)
3/32"x5/8"
(2x15mm)
Sheet capacity 19-22* 9-11*
Shred speed 27ft./min. 27ft./min.
All Models    
Shipping wt. 58lbs.  
Feed opening 9 1/2"  
Max. horsepower 3/4  
Motor output .58KW  
Electrical requirements 115V  
Dimensions (DxWxH) 11 3/4 "x15 1/2"x28 3/4"
*may vary due to variations in paper and power supply

 

Don't Throw Your Business Out with The Trash!

Contact us at 440-943-6968, toll free at 800-834-8344 or email:info@northcoastshredding.com

 

©2011 Northcoast Recycling, all rights reserved

HOME | RECYCLING | SHREDDING | NAID AAA CERTIFICATION | STORAGE AND IMAGING SERVICE | IMAGE SILO LOGIN
OTHER SERVICES | SHREDDING EQUIPMENT | OUR FACILITY | PREVENTING IDENTITY THEFT & SCAMS | CONTACT